Endurotraveller
New member
- Joined
- May 22, 2016
- Messages
- 1
- Points
- 0
Thanks for the link! I worked fine!
Can someone please identify the language in the attached picture? I will then put up a link to the associated manual.
Cheers
Hi #Freespirit , is it possible to reupload the german manual, Is not available anynore.Hi valentino86
I like others have spent many an hour looking on the net for the eLearn or the DTE version of the Ducato X230 model WSM to no avail. The DTE 94-02 version that you attempted to download was basically the 02-06 Ducato with the JTD common rail engines but in the older DTE format as can be seen from the pictures in post #8 in this thread by Davern. It covered the same X244 version as the 02-06 eLearn that is up on the site so Davern took it down to stop confusion.
I am sure there was a "eLearn" version of the 230 model as I had seen it listed on Fiats Technical Website but as of a few years ago the eLearn Workshop & ePer Parts manuals are now supplied to Fiat dealers on a keyLearn "USB" stick (with no doubt copy protection installed unlike the CD & DVDs used earlier)
If you can read German then you may be lucky as during my searches I found two scanned PDF manuals of the X230 model but both are not in English, one I was told was written in German & as for the other I don't know what language it is written in? The first is 220MB in size & covers Ducato 2.5/TD,2.8/TD?TDi & Citroen Jumper 2.0,2,8 & Peugeot 2.0,2.8 TDi,HDi.
So I will upload it to Filefactory & put the link up -
Fiat_Ducato%20Citroen%20Jumper%20Renault%20Boxer%20Repair%20Manual%201994-02.pdf
Have checked the link & it works OK, let me know if it is what you needed.
With no English X230 manual the info for the 2.8/TD/TDi engine may be got from the Iveco daily models of the same vintage. I might put that up as well later with a link also.
Cheers
I have the manual for the x244, that runs from a virtual drive OK.Hi
The extracted files/folders need to be burnt to a CD & the installation files installed on your system from there with the CD still in the drive during access of the manual.
I am not sure if it will work from a virtual drive.
Cheers