Hello all - 1st post - looking for some help.

My Passenger side electric window not operating - motor hums (or rather, grinds). Took off all door panels and saw a pair of broken steel wires hanging down - these look like they are part of a loop that enables the motor to pull the window up and down

Looks like a HORRIBLE job to try and fix - can't get near the plastic wheels / pulleys - even if I could buy the part!

Any thoughts? New door?

OK - no response.... Has anyone attempted to fix this problem? :bang:

comes as whole assembly, easy enough to fit.

T14086 said:

comes as whole assembly, easy enough to fit.

Click to expand...

Thanks - does that include the motor? any idea of the part number ?

working on anything behind that steel panel in the door looks tricky to me...

yes whole assembly,regulator/motor,for part number look at EPER (link at top of page)

CJLDucky said:

Thanks - does that include the motor? any idea of the part number ?

working on anything behind that steel panel in the door looks tricky to me...

Click to expand...

Its is tricky but manageable with a little strengh applied, you can get the whole part from a scrap yard including the motor for arounf £25, if you try and buy off the internet you will pay around £60-£75 and if you went through fiat and bought you would pay over £140

Like I say awkward but doable..

good luck

T14086 said:

easy enough to fit.

Click to expand...

sorry (scoff70 is quite correct they are bit awkward) i should add that I have done quite a few so seems easier to me.

T14086 said:

easy enough to fit.

Click to expand...

sorry (scoff70 is quite correct they are bit awkward) i should add that I have done quite a few so seems easier to me.