Technical Retrofitting OEM cruise control Doblo 263

Currently reading:
Technical Retrofitting OEM cruise control Doblo 263

Ante

New member
Joined
Nov 2, 2004
Messages
15
Points
6
Hello,

Has anybody tried to retrofit the OEM cruise control lever (it is integrated so you must change a the whole light/wiper assembly to the one also having the CC lever) to a Doblo 263? On the grande punto it is a simple swap then you activate it with e.g. multiecuscan. Is it as simple on the 263 Doblo?

Any input would be greatly appreciated. (y)
 
@ Ante
Good question. I'm wondering the same thing, to the point that I've thought that I had wrote myself your message.....
Can be a good idea to know the exact model of the grande punto you know of, so it can be possible to check if the specific ecu is the same.
 
NCS Systems list a kit for the 263. Not cheap, but then again how much would an original switch assembly along with other associated parts be?
 
Hello,

Has anybody tried to retrofit the OEM cruise control lever (it is integrated so you must change a the whole light/wiper assembly to the one also having the CC lever) to a Doblo 263? On the grande punto it is a simple swap then you activate it with e.g. multiecuscan. Is it as simple on the 263 Doblo?

Any input would be greatly appreciated. (y)


You need a vehicle whos ECU supports cruise.

In the quoted case of Grande Punto..

I own 2 ..
the twinair supports cruise (is factory fitted)
The MJ does not :(


Advice: plug into software to check if cruise is supported before wasting time and money.


Aftermarket kits seem to be £400 to £600

Charlie
 
Varese Crazy, can you be more specific? I think I saw something when I was surfing between the different electronic units in the car....
do you know the name of the entry?
So, If the entry is there, I also need to check for the wiring under the steering column?
 
Back
Top