Technical cambus light wont go out

Currently reading:
Technical cambus light wont go out

L Doblo

New member
Joined
Feb 20, 2016
Messages
14
Points
6
I had a brake light bulb go so replaced with the correct 382 orsam bulb

on firing the engine up the light is out switch headlights on foglights etc no cambus light but soon as i hite the brakes it comes on and stays on till ignition is switched of then on again

i have checked both rear assemblies and the number plate lights along with door brake light
all headlights side driving all working

any ideas as starting to think the cambus is at fault

luke
 
Make sure the earths are very good on the rear light units - also change both brakelight bulbs - are they dual filament? one may be shorting to the rear light filament a little, enough to light up, but the current sensor will see an imbalance.

Mike
 
I had a brake light bulb go so replaced with the correct 382 orsam bulb

on firing the engine up the light is out switch headlights on foglights etc no cambus light but soon as i hite the brakes it comes on and stays on till ignition is switched of then on again

i have checked both rear assemblies and the number plate lights along with door brake light
all headlights side driving all working

any ideas as starting to think the cambus is at fault

luke

hi, certainly related to brake light circuit..:eek:
 
ok bit more diggin today reveals the rear passenger side is a cheap ebay unit
different pins and mounts so now thinking as not factory this is my cambus error

so after a stock unit to disprove the theory
 
Back
Top