Technical coded pump and injectors?

Currently reading:
Technical coded pump and injectors?

Robgold123

New member
Joined
Sep 16, 2014
Messages
31
Points
12
hey all ,just a post re: me putting stilo engine into doblo ..i used the stilo injector pump and injectors ,the injectors are the same code as the doblo one ,but i talked to a mechanic the other day and he was saying the reason it isnt satarting is because the inector pump is coded to the ecu..in this case i would haveto change back from the stilo pump to the doblo pump..however reading through the posts people are saying on the 8v 1.9 jtd the pumps arent coded..any ideas?
 
The JTD 8v high pressure fuel pump on the engine is just a mechanical pump, there's no electronics in it to code.

The code number on the top if the injectors is an injector grading code. If you'd fitted different code injectors, you would need to program them to the engine management ECU via the diagnostic port with appropriate software, Mulitecuscan for example. As you've fitted same code injectors, you don't need to do that.
.
 
ok so i can rule that out ,i bought a cheap cable but the drivr for the usb soesnt seem to work with windows 7 ,so am getting a guy to come and see if there are any fault codes on the ecu..
 
Back
Top