I am trying to make an auxiliary input for my delphi 263 in the Fiat Doblo

can anyone please try to help me as I cannot get anything through this.

Desperately need some help please!

When you say "auxiliary" input, by this do you mean a constant live feed?

You may have to tap into the ignition feed, or perhaps run a fused wire from the battery +

The radio system in the Doblo is mad! I fitted a JVC and if I switched the red/yellow wire it stayed on all the time. As it was, I left them as they were so it retains the memory when the ignition is switched off.

Bit of a pain....

I am trying to do the same thing exactly - I have connected a yellow 6 pin ISO to 3.5mm connector. I did not get the AUX option when I pressed the Media button. There is another thread on here that suggested connecting the D IN and D OUT pins on another Delphi stereo with identical pin specification. That did let me select AUX when pressing the Media button- but still no sound . Did you make any progress?

lauwaitung said:

I am trying to make an auxiliary input for my delphi 263 in the Fiat Doblo

can anyone please try to help me as I cannot get anything through this.

Desperately need some help please!

Click to expand...

Hi, I have exactly the same problem and the same situation. During the time did you have found a solution now ?

Thanks.

SimonDoubleDoblo said:

I am trying to do the same thing exactly - I have connected a yellow 6 pin ISO to 3.5mm connector. I did not get the AUX option when I pressed the Media button. There is another thread on here that suggested connecting the D IN and D OUT pins on another Delphi stereo with identical pin specification. That did let me select AUX when pressing the Media button- but still no sound . Did you make any progress?

Click to expand...

I bought a cable from Poland on ebay - and he still sells them!

Search in ebay for item 202417287587 or for FIAT 500, PANDA AUX IN Adapter for IPHONE MP3 NO SOURCE AVAILABLE FIAT 139 MP3.

Good luck!

I have this for sale which will sort your issue
www.ebay.co.uk/itm/143333235779?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

LUIGI

Hi I had the same problem with fitting Aux cable to stereo, purchased a yellow connector aux cable from eBay to click into the aux socket on the stereo (advised it would work from ebay seller) connected but did not work! After some digging I found the same stereo where someone had cracked it... so as fitted to mine, get an aux cable 1.5 meter ish, keep the 3.5 mm aux connector, on the other end strip the ends of the three wires, you will need small female push connectors to punch onto the male connectors in this order:

Black to AFR
Red to AF earth (upside down T)
Light Blue to AFL

Next get a wire 2” long, add male connector to either end and connect to “D out” & “D in”, to complete the circuit, if you do not do this step the stereo will not know there is a connection.

That’s is! Once complete press media to cycle from CD to AUX, AUX will now be displayed.

Colours may differ on AUX cables but the black and red are the key colours.

Edit: Next get a wire 2” long, add female connector to either end and connect to “D out” & “D in”, to complete the circuit, if you do not do this step the stereo will not know there is a connection.

Luke Bull said:

Edit: Next get a wire 2” long, add female connector to either end and connect to “D out” & “D in”, to complete the circuit, if you do not do this step the stereo will not know there is a connection.

Click to expand...

Just to confirm I have the same Delphi F263 EUR as pictured in original question post.