Ok all stated when the eml came on had codes read it came up with a maf fault so I got a second hand one off eBay fitted it reset eml (code reader also off eBay £11.50 well recommended)
All then ran fine for about a week when it started to suffer this lack of power thing as though the turbo isn't working ie won't pull below 2250 rpm.
Now before you all shout Egr valve I allready been reading all I can find on here so after disconnecting the maf and the car went back to normal I took that out and cleaned it oddly mine was stuck solid shut so thats tested and working fine now .
Anybody with any other ideas no fault codes won't pull disconnect the maf eml light on pulls like a train
Cheers Ian
All then ran fine for about a week when it started to suffer this lack of power thing as though the turbo isn't working ie won't pull below 2250 rpm.
Now before you all shout Egr valve I allready been reading all I can find on here so after disconnecting the maf and the car went back to normal I took that out and cleaned it oddly mine was stuck solid shut so thats tested and working fine now .
Anybody with any other ideas no fault codes won't pull disconnect the maf eml light on pulls like a train
Cheers Ian