(S) Dual handmade frontlights - Ram-Air for cinque..

My new handmade (front)lights for my cinque.
Also working as a Ram-air..

Check this out:








When I am finished I 'll upload more photos!..

It's a cool idea but i'm not too sure the headlights will be very effective due to the mesh, and not sure on road laws in greece but i don't think they'd be road legal here thats for sure.

Looking good, I was going to give this a go but found that the lights i had were to big for the orginal light holes. Looking forward to seeing more pics once finished.

I am finished, looking good! Not TOO effective (but I think it's not of the mesh but of 55watt lamps!!) When posted in clubcento.gr I 'll link the pics!

In Greece everything is legal and illegal at the same time!

I took the briefest of looks at this and worked out that 2 x 5 3/4 inch Cibie H130s might just fit. They're E approved and the mounting rings feature adjustment. The trick would be to put the mesh behind as on the Integrale.

I used the Hella fish eye units at, I think 100mm,

Cheers

D

like the twin head light idea not quire sure I would go for the same look but it's good to be individual


but are you really planning on feeding these 2 huge scoops diretly into the TB? I presume (hoping) you have done other things

Not both of them. Only drivers side. Right on the back side of the light-scoop is a CDA-BMC. 1242cc 8v cinq..
The left one will just cool the engine..

Not yet finalized but I'm on to it..

Pics don't want to load. (Sorry -- patience -- or broadband -- required)

I'd be inclined to duct air straight to the filter and use the other intake for something useful: maybe you could duct the flow to a small oil cooler mounted behind the headlamps and then out through a duct on the bonnet a la Elise? Maybe combine this with a raditor outlet? (Must get seriously hot in Greece in the summer!)

Thing here is that it's easy enough to make holes into an engine bay, but more important to provide a way for the air to get out!

they look ok,but would look better if the mesh covered the whole light unit

The cut outs are a bit rough but I think they work!

Liam

Here is a photo of the Ram-Air:

I was just going to say do you have a splash shield in there to stop the airfilter becoming soaked by sucking in water, but then I noticed your location and realised it won't be that bigger issue for you