Hi

Just after some advice if possible. My son has a 52 plate Seicento S 1.1 and needs a new clutch. I rang my local motor factors to get a price and was told there is a possible 4 clutches to choose from. Is there any way of identifying which one is needed?

I recently got him a inner driveshaft boot and was told by Fiat that he has the uprated gearbox (inner drive shaft boot with bearing)

We have had the car on a ramp to see if we could find any identification marks on the box but no joy.

I would take it to a garage but have been quoted a minimum of £260, double than what he paid for the car, so he has it booked in at his college for Friday.

Thanks in advance for any info.

I don't know why they said there are 4 versions.

http://www.eurocarcare.net/clutch-kits/ecc71741290-clutch-kit.html

It's just a 180mm clutch that'll fit a FIRE engine.

Brilliant, thank you.

You need to know which gearbox you have fitted as two types of clutch available. One is for a dry shaft C514 and the other for a wet shaft C529. It sounds like you have the C529 if you fitted a new inner drive shaft boot with the bearing.