So finally had some time to get on the fiat today!

Replacing the rear flexi with braided bits - how do I remove it the flexi from where it connect to the brake line at the rear axel?

I'm on driver side.. Is this going to involve me dropping the axel/fuel tank?

Never done it, but I think most folk drop the tank. Get some PlusGas/GT-85 on the tank fasteners and on the pipe unions (where you can see/guess them) well before you do it.

if you are doing all the brake pipes at the rear, drop eveything, so you can do it right ! Won't take long.

Thought so!

Got to drop the whole rear just because of one bolt! Ugh!

you thanks me later for this. I recently replaced all the pipes from the middle f the car onward!

Ming

I can see already! I'm assuming I need to drop the fuel tank aswell - or can I get away with just the rear beam?

If you wanna pop on a train from Laaanndan, please feel free?

Chris

Chrisoleil said:

I can see already! I'm assuming I need to drop the fuel tank aswell - or can I get away with just the rear beam?

If you wanna pop on a train from Laaanndan, please feel free?

Chris

Click to expand...

once the beam is off, the tank is held on by 2 nut. So might as well comes off then you can underseal everything too

I would love to haha !

Chris might be able to pop up this sat if any help?

Party round mine Saturday by the looks of things?

And Ming - train to Chippenham and I'll collect in my 155. Only 1.5 hour train from Paddington - direct line, no changes!

Chrisoleil said:

Party round mine Saturday by the looks of things?

And Ming - train to Chippenham and I'll collect in my 155. Only 1.5 hour train from Paddington - direct line, no changes!

Click to expand...

:O That is interesting, i can drive now, got a charade as a run around ! haha

Also when make the pipes up, give it a bit extra !