chimpycento
New member
Can't wait to get mine back and bolt it on!
Tuning Making a 40mm Throttle Body
- Thread starter sparky5
- Start date
-
- Tags
- 40mm spi throttle body
Currently reading:
Tuning Making a 40mm Throttle Body
David Byrne
New member
- Joined
- May 12, 2015
- Messages
- 1
- Points
- 0
How do I get a throttlebody ordered as I live in Southern Ireland ?
send sparky a pm, hes a really good bloke and his work is recommended by loads...
I now have a ported, skimmed and flowed head, with a fast road cam and a stainless 4-2-1 manifold .
And with those mods added to the sparky TB the effect is AMAZING
up to 3000rpm - grunty but similar to the stock SPI -- at 4000RPM it howls , picks up its skirts and f**ks off for the horizon.
At the recent kit car show people could not believe it was a Seicento engine :slayer::slayer:
And with those mods added to the sparky TB the effect is AMAZING
up to 3000rpm - grunty but similar to the stock SPI -- at 4000RPM it howls , picks up its skirts and f**ks off for the horizon.
At the recent kit car show people could not believe it was a Seicento engine :slayer::slayer:
oohh i see you do P75 ones .. what size do you bore them out to ?
.. what size do you bore them out to ?
OP
OP
oohh i see you do P75 ones
I've done one to 42mm, but I think it would go to 43mm.
more pics in my gallery.
I've done one to 42mm, but I think it would go to 43mm.
more pics in my gallery.
hopefully after ive sorted the turbo manifold ill be sending you a pm
I've done one to 42mm, but I think it would go to 43mm.
more pics in my gallery.
You have pm
shambolina
New member
- Joined
- Sep 20, 2016
- Messages
- 32
- Points
- 8
Ive received 6 of these today for class 1b irish hillclimb cars. Thanks to Steve for making them for us. The quality of the bodies is superb, its a pity no one can actually see the work when fitted.... Now time to get my engine back together and see what this machne will go like. Ive a skimmed and ported head with a 866 cam which is shimmed and doweled, block tidied up for new rings, rods balanced and crank done up. Home made induction kit all ready to go with new gaskets, belt kit, clutch, thermostat etc. Exhaust will be decatted and reduced to a single ulter backbox. Have a mate working on a map to suit these mods, 4 chips to be tried and we'll pick the best and work on the other 3 to try and get closer. Will be happy woth over 70 hp but would love to see close to 80hp. Time will tell
stuartaw11
New member
Are these still being made?
OP
OP
Yes, I'm still doing larger Throttle Bodies for SPI, MPI & P75
PM sent.
Deef1908
New member
Where can I get the paper gasket for the throttle body ??Thanks for your comment and yes I still mod. SPI throttle bodies, I can also do MPI and P75 ones.
PM sent
if your still doing them i might be interested mate
OP
OP
Yes, I'm still doing the larger throttle bodies, I have a MPI one done and can do SPI and P75, send me a PM with which one your interested in.
i have a sei 1.1 sporting mpi with this
Fiat Punto 75 (176) 1.2 i.e. 54 kW / 73 PS
Engine: 176A8.000 / M3: 1.2 MPI 8V throttle body can you make it larger?
Attachments
OP
OP
I can mod. the P75 throttle body to 42mm.
Completed TB
www.fiatforum.com
with the upper part of the tb wht we are going to do ?you have it ready and complete for shipment?and if it is possible send me a photo with the tb ready and a price with the shipment to GreeceI can mod. the P75 throttle body to 42mm.
I have a 40mm MPI one done and a 40mm SPI one nearly finished.Completed TB
Johnspanda
New member
I can mod. the P75 throttle body to 42mm.
Completed TB
I have a 40mm MPI one done and a 40mm SPI
I can mod. the P75 throttle body to 42mm.
I have a 40mm MPI one done and a 40mm SPI one nearly finished.
one nearly finished
Hi are you Still doing a 40mm throttle body for a 1.2 8v mpi panda 2006
OP
OP
I have a 40mm MPI throttle body done.
www.fiatforum.com
Finished TB
www.fiatforum.com
Johnspanda
New member
Hi could you send me some details. So I can purchase. John
