Hi everyone, I recently bought a '99 Seicento and during a clean up I managed to snag the Immobiliser cable and pulled it clean away from the ignition barrel. Don't ask me how I managed that, I've no idea!

Anyway, I need your advice on what's the best way to rectify this please, as I'm not exactly loaded and would be grateful for any help/advice... am based in Wiltshire.

Thanks...

if you can get it to go back in place, do that. if not just replace it with one from a scrappy - they're not coded or anything

Thanks for that.

Just another small point though. I noticed there's 2 copper wire connectors on the loose end, but I was wondering if you know whereabouts they need to go back to?

Questions, questions...

There's a little box under the dash on the drivers side, they go there.....just splice the wires back together. Doesn't matter which way around they go.

It essentially just a spiral of wire with a connector.

Kristian

Thanks for your help gents... :slayer:

The immobilser ring plugs into the box, so there is no need to cut 'n' shut the wiring, just unplug one from the scrappy and plug it into yours.

Cheers

PD

I just meant it would save a trip there or even get it running so you can drive there to rip one out another car