(S) Seicento Centre Caps

Hi,
Whats the size of the centre caps on the standard alloys on the Seicento (see link) http://foto.spullenbank.nl/common/im...37/_T33707.jpg

I've seen some Abarth ones at 50mm, will these fit?

Thanks,
Simon

yep... the fiat ones in there are 50mm

u could of always measured them tho

how would i get the old caps out without damaging the alloys?

cheers,
si

the only way i have com across is takin the wheel off and pushing from the back.

some come out a lot easier than others! stand the wheel up and lightly tap, well moderatly, dont go mental, with a hammer is a winner for the stubborn ones, but try pushing them with your fingers first!

Can you post a link to the Abarth ones? I bought some Abarth ones and they are a rubberised sticker which sticks over the existing cap, it's more than likely that you are looking at those

gutted... how much u pay for them?

they are actual caps, but i have seen the 'sticker' ones a bit cheaper, are these just as good?

si

is there anyway i could get them off without taking the wheel off?

si

hmmm neva tried.... cant think of a way either cause they need a proper push to get them out, u MIGHT be able to get them out with a flat blade of sum sort, but run the risk of damaging them

I doubt you'll get them off with a flat blade - you'll either scratch the alloy, gouge the alloy or damage the cap.

The only way I managed to do it was to get a piece of wood behind the centre cap and hammer it, so I think you'll have to take the alloy off.

HTH

totally agree, i had to hammer mine, was just clutching at straws!