(S) alloys

Sorry if this has been asked but will these go straight on?

http://cgi.ebay.co.uk/14-Deception-a...d=p3286.c0.m14

You need to ask for fitment,

4x98 PCd, and ET 30.5.

But say if they only have ET 35, then you will need 4.5 mm spacers at front.

Hope that help

Ming

Got a messege back saying 4x98 and et38.
So will that mean 7.5mm spacers for the front. Do i not need it for the back?

No need for the back...

As for spacers, you might as well get the 10mm hubcentri fiat, at £40 a pair.

The part number is 0046532804. And get some wheel bolts that is 10mm longer from this guy http://www.fiatforum.com/classifieds...t=10169&cat=17

Then that's you sorted , and what i also done is getting the longer wheel locator bolts from fiat (part number for those is 16043824 and you will need 2, one for each side) which hold the hubcentic in place, (but is not a must)

It makes putting the wheels on much easier

Ming