I am Brazilian and I come here for help.
Already I apologize if you created the topic in the wrong place ...
I am installing sound on Bravo and researching on the diagram of the player, have not found where to pull the remote cable to connect the Amps.
My original HU is Visteon VP6FCF (I can not yet put link).
I am suspicious that it has no remote output ...


The Project:
Kit 2 Way>Helix B Two
Sub 10"> Mtx 500.1

Can someone help me?

Hi, I'm 99% sure that the amp would be controlled through the CAN network.
So it shouldn't need a analog remote output.

Test the 12V leads in your wire harness that plugs to the HU.
If it has 12v only when the ignition is ON, then use it as a remote lead.

Otherwise, take the lead from the cigarette lighter.

aurick86 said:

Hi, I'm 99% sure that the amp would be controlled through the CAN network.
So it shouldn't need a analog remote output.

Click to expand...

I think not.
It accepts high input, RCA and need the remote.

Tad-bravo said:

Test the 12V leads in your wire harness that plugs to the HU.
If it has 12v only when the ignition is ON, then use it as a remote lead.

Otherwise, take the lead from the cigarette lighter.

Click to expand...

I would like to turn the amp when I turn on the HU.
I see my way out (hopefully) will really test each connector to find a 12V as the diagram indicates no remote output.

I don't think you will find a lead that sends 12v only when the HU is on, you'll find one that is on when the ignition is on. but you can always try. it's easy to do it with a multimeter.

Luftra said:

I think not.
It accepts high input, RCA and need the remote.

Click to expand...

I meant to say "the original sub woofer is powered on using the CAN network ( so it does not need an analogical remote pin)"

You could use a hy-lo convertor which also has a DC Amplifier Turn On Trigger something like this: http://www.sonicelectronix.com/item_40540_NVX-XFLOC2.html

The original subwoofer's amp is powered when the ignition is on.

Tad-bravo said:

I don't think you will find a lead that sends 12v only when the HU is on, you'll find one that is on when the ignition is on. but you can always try. it's easy to do it with a multimeter.

Click to expand...

Yes ... I have to test with multimeter each.
I will use only with car running. So I want to have the freedom to use it when HU connect too. No use key to turn on / off remote.
All this not to lose the functionality of the steering wheel and B & M ...

aurick86 said:

I meant to say "the original sub woofer is powered on using the CAN network ( so it does not need an analogical remote pin)"

You could use a hy-lo convertor which also has a DC Amplifier Turn On Trigger something like this:

Click to expand...

Oh yes ... I did what he suggested.
But my Amp need the remote.

Already researched these converters. But here in Brazil we do not have so many quality, only importing.
Another problem would be the quality affected with these converters that normally give noises.

My Amp Helix B Two accepts high input. Direct will HU him. The other Amp MTX does not accept high input but I will use the only RCA output that offers HU ... I believe it lol! I not yet pulled the HU because I did not find that key to remove. I only have the manual information.