Okay Guys :bang:

Just was installing some Halogen Bulbs since one of my HIDs fused out, So I decided to install a new pair of Halogen Bulbs today, First bulb went in without any Issue. But the second bulb which is near the windscreen wiper fluid, While installing the Bulb it slipped though my hand and fell into the Actual Headlight Unit...

Can someone guide me how to remove the headlight recover the bulb ? Or is it just better buying another set of Bulbs...

This is for a Fiat Bravo 2007.

I'm 99% sure it's a bumper off job, it is on the Grande Puntos.:thumbdown:

Yes, you do need to take off the bumper first because the headlights actually help support the bumper.
I would first tri to remove the bulb with magnet attached on a string/stick someway.

aurick86 said:

Yes, you do need to take off the bumper first because the headlights actually help support the bumper.
I would first tri to remove the bulb with magnet attached on a string/stick someway.

Click to expand...

I might this give ago, U sure it would be safe to put a magnet down the headlight?

Well you should be ok.. be aware that the reflecting surfaces in the headlight can wipe off pretty easily.

I would try with a piece of wire on wich you have wrapped the magnet with electrical tape.. so i will not scratch and cannot fall in the headlight.

BravoCity said:

I might this give ago, U sure it would be safe to put a magnet down the headlight?

Click to expand...

You'll be fine, alternatively and stick / rod with some double sided sticky tap should work also

I think I might order this

http://www.maplin.co.uk/p/pick-up-tool-approx-14mm-bn98g