After some help, the drivers side headlamp washer on my T-jet is jammed in the open position. It works fine, but fails to retract fully - remains around 50mm sticking out. I've tried pulling and pushing it, but it gets stuck in the same position. Any ideas before I take the bumper off to have a look?
Technical Bravo headlamp washer Jet stuck open
- Thread starter deebo007
- Start date
Currently reading:
Technical Bravo headlamp washer Jet stuck open
ad25121048
New member
- Joined
- Mar 18, 2012
- Messages
- 39
- Points
- 13
I have the same problem! I've just left it as it is as I don't fancy taking the bumper off the car.
If you do happen to remove the bumper could you take some simple pictures of what needs to be removed and in what order?
My washer jet still works but like yours will not fully retract.
Thanks.
Check the fuse? It's an MOT failure if these don't work. When I went to view three different Bravo's with the xneons ours was the only one that functioned correctly. On the others the hose had come off behind the bumper or just did work.
Let us know what it is in the end when you solve your problem
Let us know what it is in the end when you solve your problem
kidneystone
Member
It won't be the fuse if it works fine, but fails to retract fully. I have the same problem. See this thread https://www.fiatforum.com/bravo/352574-headlight-washer-part-number.html
They work from what I understand, just don't return, which isn't an MOT failure.
Yes, Kidneystone and MEP are correct, the jets pop out and spray correctly. Unfortunately, the drivers side jet does not return fully into the bumper. Tried pushing it in, but stuck fast and will not go any further insode the bumper.
