Styling Interior l.e.d

Currently reading:
Styling Interior l.e.d

Joined
Aug 1, 2011
Messages
2,029
Points
399
Location
Swansea
Just wondering if anybody has put in l.e.d lamps inside their Bravos,
I would like some in mine but a white light,

If you have done yours could you post some pictures of what they look like and do they throw up a light on the dash?

Cheers
 
here we go :)
 

Attachments

  • 1403732833277.jpg
    1403732833277.jpg
    47.9 KB · Views: 131
the holders come out of the roof cloth front and back there tight so be brave but careful at the same time as u dont want to damage the roof cloth its easier if u have a trim removal kit and the bulb size is 39mm festoons you can get them off ebay for buttons ul need 4 bulbs as 2 go into the front and 1 for each side of the rear
 
the holders come out of the roof cloth front and back there tight so be brave but careful at the same time as u dont want to damage the roof cloth its easier if u have a trim removal kit and the bulb size is 39mm festoons you can get them off ebay for buttons ul need 4 bulbs as 2 go into the front and 1 for each side of the rear
Fantastic. Just bought me this. Cheap cheerful and comes with four bulbs... Perfect :) http://www.ebay.co.uk/itm/161254833120
 
This post contains affiliate links which may earn a commission at no additional cost to you.
a got the discs and pads from dingbro dunno if uve heard of them its another motor parts company lol and al do the caliper covers at the weekend a need to get some red laint for the rest of the caliper
 
I can't imagine interior lights being linked to the Canbus system in all honesty so shouldn't throw up errors, I might just do this myself, just need to find our what bulb it is. I'll take a look tomorrow.

ive got white leds in mine swift007 and they dont link with the canbus system the bulbs they take are festoons al put a pick up shortly :)

They are fully canbus network controlled ;)

Not on bulb failure system though (y)
 
Back
Top