Hi there,
I have a Fiat Bravo 1.9 150 Multijet, the warning light came on yesterday while I was driving on the motorway. I was doing 100mph and then decided to see how quick i could get to 120mph ( motorway was empty, night time).
Anyway, when i put my foot down, the warning light came on and the engine went into limp mode, lost power and wouldn't go above 70mph.
Stopped at the next petrol station and turned the engine off for five minutes. Warning light didn't switch off, but i could go above 70mph, however i had lost some power.
Then i noticed that the car makes a really low hissing/whistling noise.
Today i connected the fiat ecuscan and the following errors came up:
P0500 - Vehicle Speed Signal (CAN)
U0426 - Invalid Data From Vehicle Immo Ctrl Mod
P0094 - Fuel Pressure (high press, pump input regulat.)
P0237 - Turbo Pressure
The car was remmaped around two weeks ago, there was no problems with it, no smoke, the ride was smooth, everything was good. I have been on a journey to portugal and back, around 3000miles all together, and there was no problem. so im guessing that it has nothing to do with the remmapping?
also i only bought the car around 2 months ago from a dealer, it came with 6 moths gold insurance, which covers the engine and electrical faults.
if i need to replace/fix anything to do with these faults, would they come under the warranty?
I have cleared the codes, and they haven't come back on.
thank you
I have a Fiat Bravo 1.9 150 Multijet, the warning light came on yesterday while I was driving on the motorway. I was doing 100mph and then decided to see how quick i could get to 120mph ( motorway was empty, night time).
Anyway, when i put my foot down, the warning light came on and the engine went into limp mode, lost power and wouldn't go above 70mph.
Stopped at the next petrol station and turned the engine off for five minutes. Warning light didn't switch off, but i could go above 70mph, however i had lost some power.
Then i noticed that the car makes a really low hissing/whistling noise.
Today i connected the fiat ecuscan and the following errors came up:
P0500 - Vehicle Speed Signal (CAN)
U0426 - Invalid Data From Vehicle Immo Ctrl Mod
P0094 - Fuel Pressure (high press, pump input regulat.)
P0237 - Turbo Pressure
The car was remmaped around two weeks ago, there was no problems with it, no smoke, the ride was smooth, everything was good. I have been on a journey to portugal and back, around 3000miles all together, and there was no problem. so im guessing that it has nothing to do with the remmapping?
also i only bought the car around 2 months ago from a dealer, it came with 6 moths gold insurance, which covers the engine and electrical faults.
if i need to replace/fix anything to do with these faults, would they come under the warranty?
I have cleared the codes, and they haven't come back on.
thank you