As the title says, anyone know or is there a guide because I can't seem to find one on the forum?

Ive been looking round the internet for ages for one of these, but cant find anything. Think ill have to bite the bullet and go to a Fiat garage and ask them how.

You sure you want to do that yourself, with the airbag and all??

I would take it to dealer to get done, there are 2 types...one is awkward to get off and the other can a bas*ard. There is a special tool that helps abit.

Disconnect the battery.
Wait at least 10 min.
On both side of the steering wheel there are small circle. Push a pin in ( I used torx screwdriver) and push the springs to release the airbag.
Disconnect the airbag connectors.
Then remove the center nut.
Remove the shrouds to get access the electrical connectors.
Remove the steering wheel from the shaft (rod).

stilos said:

Disconnect the battery.
Wait at least 10 min.
On both side of the steering wheel there are small circle. Push a pin in ( I used torx screwdriver) and push the springs to release the airbag.
Disconnect the airbag connectors.
Then remove the center nut.
Remove the shrouds to get access the electrical connectors.
Remove the steering wheel from the shaft (rod).

Click to expand...

I'll see if I can do it that way tomorrow

And wear a full face crash helmet

I love the note

Keep the airbag in the special cupboard...

stilos said:

Disconnect the battery.
Wait at least 10 min.
On both side of the steering wheel there are small circle. Push a pin in ( I used torx screwdriver) and push the springs to release the airbag.
Disconnect the airbag connectors.
Then remove the center nut.
Remove the shrouds to get access the electrical connectors.
Remove the steering wheel from the shaft (rod).

Click to expand...

Wow, ive been looking for this for ages! Thanks, im also going to give it a go tomorrow!

In case you just wanna have a look of what's in there and don't need to replace the wheel, you'll end up with very ugly holes on both sides of the steering wheel.

Leejet has got it right, Motormech Birmingham showed me with his airbag removal tool (small torx just as good) Don't forget to remember codes before you disconnect the battery.

Just finished changing my steering wheel! instructions were spot on and did not find them hazardous at all! Airbag and new steering wheel are all happy!

Took me 2 days :bang: since I was practically going blind since no schematics nor youtube videos apply to the (I guess ancient) locking system that my 2009 Bravo wheel had!

(I'm replacing the wheel if I can get a new one from other Fiat cars (17mm hub), as the Bravo wheel doesn't seem to be in production anymore, can't find a new one anywhere.)

Here's how the tool has to go to unlock the 3 clips on each side:

youurayy, did you manage to find a replacement steering wheel? The clips shown in your photo look different to those shown in the image posted by stilos. It looks like there are 2 types.

I just bought a wheel that looks like yours (internally) to replace my existing one (2008 Bravo) it's the wrong one for the current airbag - dammit. I thnk I'm going to have to get another airbag to fit the new wheel.

Can anyone shed any light on the 2 different steering wheels for the Bravo?