i have the light for it on the speedo so i hoped i had the cable.. alas.. i did not :bang::bang:
it's a generic cluster. You'll also have lots of none applicable warning lights on it which are not for your car
i have the light for it on the speedo so i hoped i had the cable.. alas.. i did not :bang::bang:
Dear stilos,You are welcome.
I've already installed cruise control to a lot of bravo. As I see, all 120 T-Jet (Dynamic) bravo were prewired.
150 T-Jet, 1.6 Mjet, 1.9 Mjet's aren't prewired. With 2.0Mjet I've no experience. After wiring installation all work properly.
Hi mates,
Cruise control installation is possible to bravo. Dealers sad here also, that it won't work, but it is working in all bravo. I've already done a few.
There are two option:
1. The bravo is prewired. The white connector is hidden under the steering wheel top cover.
2. The bravo isn"t prewired. In this case U have to route 4 wires to ECU and 1 wire to fuse box.
The connector, which is mentioned in the stilo topic, exists only 1.4 16V 90HP.
The dealers sell only the whole stalk assembly. It is expensive. From carbreakers it is must cheaper to buy the CC stalk separetaly. It is fitted on the std stalk by two screws.
I've done pictures and "manual", but unfortunately, I haven't had time yet to translate.
Read this:
http://www.davole.com/files/CC_on_Bravo_198_T-Jet_Sport(110kw)_DaVoLe.com.pdf
If anybody request, I have pictures.
Your car has a factory cable installed already. Just buy a stalk and connect it and that's all.If this is the connector how i test if the cruise control function works in my car
i see a post for 2 and 4 pin must short but who is this ??
i dond want to damage the ecu...
[/URL][/IMG]