hi there ive checked some of the older treads but i cant really find what im looking for,

My little brother just got a new fiesta fusion with some 15" alloys 4 stud he bought him self some new 17s which look the works

I have tried to fit these to the fiat and i can see all 4 holes, But can only fit bolts to 2 of them the other 2 or about half way under the hole....

Ive checked alloy wheel guides on the net and i cant find the new fiesta its the 2006 - 7 model and i cant find the pcd size and so on for it, Now they look like they would fit but i cant find out, Could any one shed some light on this please thanks !!!

sorry its new ztec

Now I might be wrong regarding the mk 6 fiesta but,
Ford PCD for 4 stud fitment is 108 or at least is up to the mk 5 Fiesta.

Ford is the same as Peugeot and Citroen 4 stud application

Fiat 4 stud is 98 PCD

I think you have answered your own question if you can't get the bolt holes to line up then the PCD is different.

yer but what i want to know is if there is any thing i can use to get them to fit.... i mean with 4 *100 you can get wobbly bolts to fit them, I was woundering if there was some thing like this i could get for them or some **** like that....

Afraid not. 98 PCD will fit a 100 PCD with an off set bolt because 2mm is not a lot to correct but 10mm is just too much.

ok well i know a lot of wheel types that will fit

Direct Fitment
First off Fiat lol
Lancia
Alfa

With Wobbly Bolts
Some Vauxhall
DAIHATSU only certain models

Makes not sure about
Ive been told Renault but im not sure about that i was told the bore was too big
VOLKSWAGON yet again some models with some PCD and offset but once again told the Bore is off by too much


Thats about all i know too look for i was just hopping i could get some thing for them as they where coming to me for a fee of £0 lol but might as well just tell him to sell them on. ~
~~

Could some one confirm the wheels models ive put up there please. Does the bore matter that much or can you have a certain play in it ?

100 PCD

BMW MINI
BMW 1600
BMW 3 Series (E30)

Daewoo Espero
Daewoo Nubira
Daewoo Lanus
Daewoo Nexia

Daihatsu Gran Move
Daihatsu Sirion
Daihatsu Charade
Daihatsu Applause

Honda CRX
Honda Concerto
Honda Prelude
Honda Accord
Honda Civic

Kia Sephia
Kia Mentor
Kia Concord
Kia Shuma

Mazda 121
Mazda MX5
Mazda 323
Mazda MX3

Mitsubishi Carisma
Mitsubishi Colt

Nissan 100NX
Nissan Almera
Nissan Micra
Nissan Sunny

Proton All

Renault Espace
Renault R21
Renault R19
Renault Laguna
Renault Clio
Renault Megane

Rover 400
Rover 200
Rover 45
Rover 25

Seat Ibiza
Seat Inca
Seat Toleda
Seat Arosa
Seat Cordoba

Skoda Felicia
Skoda Favorit
Skoda Forman

Subaru Justy

Suzuki Baleno

Toyota Yaris
Toyota Starlet
Toyota Paseo
Toyota Corolla
Toyota MR2

Vauxhall Corsa
Vauxhall Nova
Vauxhall Calibra
Vauxhall Cavalier
Vauxhall Agila
Vauxhall Astra Mk3
Vauxhall Vectra
Vauxhall Astra Mk2

Volkswagen Polo
Volkswagen Vento
Volkswagen Passat
Volkswagen Jetta
Volkswagen Lupo
Volkswagen Golf
Volkswagen Corrado

Volvo 360
Volvo 440
Volvo 460
Volvo 480
Volvo 340

There is a difference in spigot size. I can't remember whether Fiat is smaller or larger this applies to VW too

so i take it these will not fit because the bore is totaly different

YRV 2wd & 4wd 01> PCD 4 - 100 Offset 35 - 45 Bore 64.1

Yes. But only a problem on factory wheels. After market wheels usually have much bigger bores and then you fit a plastic adaptor inside to correct the spigot size.

Is that safe plastic with in a wheel :|

God i hate shopping for wheels lol more so when every one listen them never states what sodding size they our :|

yep. some are alloy. They are not load bearing as such.