Technical Bravo hgt 2.0

Currently reading:
Technical Bravo hgt 2.0

bravopython111

New member
Joined
Oct 14, 2016
Messages
10
Points
3
Hey guys I really need your help. Recently my bravo has been working strangely, the rpm dial is sitting below 10.000 rpm and whenever I push the gas pedal to shift gears it seems like I am losing gas. What could be the problem.
 
20161203_132627.jpeg here's a pic of the rpm
 
Check your dash and engine earth first. Take them off, clean both surfaces and put them back on.

Take the dash out, unplug it and clean the terminals.

If there's a boggy feeling under load it could be your throttle position sensor. Again the first thing to do is unplug it, clean the terminals and try it again.

WD40 in there in case you have condensation trapped in the plug.
 
Check your dash and engine earth first. Take them off, clean both surfaces and put them back on.

Take the dash out, unplug it and clean the terminals.

If there's a boggy feeling under load it could be your throttle position sensor. Again the first thing to do is unplug it, clean the terminals and try it again.

WD40 in there in case you have condensation trapped in the plug.
There is a boggy feeling, when I let go of the throttle, the car jerks and this happens in every gear, where would I find this sensor, I am a noob for these things, I will take it to a car electrician would he be able to fix it?
 
It's the little black box the opposite side of your throttle body where the cable goes one side it'll be on the other.

Do you get a misfire when you lift as well? It could be the MAF sensor between your throttle body and air box.
 
It's the little black box the opposite side of your throttle body where the cable goes one side it'll be on the other.

Do you get a misfire when you lift as well? It could be the MAF sensor between your throttle body and air box.
Thanks for your insight I will try to fix it myself tomorrow, I will let you know if I succeed
 
Back
Top