Hiya Folks.

Attempted to drop the sump on my 2001 1.2sx yesterday as its leaking, but found some one had nicely rounded off one of the allen key bolts on the engine mount bracket, its number 14 on the image below:

http://eper.fiatforum.com/cgi-bin/n...P.NA.00976.FCTLR/f1l.na&type=N&key=1000200001

For some strange reason it doesnt show what bolts are needed on Eper, anybody, by a stroke of luck have any idea?

Thanks
Lee

i found a splined torque will tap into the hex head of the bolt head and this should then hold to take out the bolt hope this helps

Thanks for the advice brava51.

Just need to trawl around local garages now to try and find a replacement for it, as for some unknown reason there not listed on ePer.

All th best.

the bolts are known as CAP=Heads ,
you'll just need to know the length + thread diameter,
an agricultural place may be a better bet, or an ironmongers,

charlie

Thanks for the post Charlie.

My old man works for a plant hire company and he knows the fitters pretty well, so will get him to see if he cant get a replacement.

All the best.

do you have your bolt yet ,i use varios of all sorts i can pop 1 in the post for you if you know size

I think you have to split the box to gain access to one of the bolts....

To the sump or support bracket?