Hi guys. The other day my central locking and alarm stopped workin when I pressed the button on the key, I thought it might be batteries in the key cause I couldn't remember when I last changed them, but even with new batteries in the key still nothin anyone any ideas what could be causing this, cheers guys

Any help or ideas would be great bp I am stuck on this one not got a clue, cheers guys

flat or low car battery.

Na shouldn't be anythin like that had new battery 6 months ago

bravotony said:

Na shouldn't be anythin like that had new battery 6 months ago

Click to expand...

:doh:

So that means that it won't be that then You checked it?

Most Easterly Pandas said:

:doh:

So that means that it won't be that then You checked it?

Click to expand...

No not checked it but surely flat battery would mean car wouldn't start and low battery would mean car would struggle to start and I would have issues with other systems on car, central locking works from passenger side door but just not from key !
Everythin else is working perfectly apart from the central locking and alarm from the key !

Hi guys looked into it and I believe my blue has lost its code which can be reset in the car using the red key and a process to reset the code in the blue key does anyone know the process ?

i have exacly the same problem m8 have u managed 2 sort it or does ant 1 else no what 2 do

Not yet but my local garage I use has a big book with a lengthy process in it to re code the blue key as long as you have the red key so I am going in to borrow that and give that a try

If you search on the forum under Bravo/Brava you should find loads of posts explaining the procedure, also try FiatBoo.

The master key / blue key sequence is for the immobiliser only, nothing to do with central locking/alarm.
Test as follows:-
push button on key, if red led flashes, then key is ok.
push button on receiver, if green led flashes, receiver is ok.
If c/l does not operate when key button is pressed, then key and receiver are out of sync.
You need to re-load in the key to make it work,- you need the unlock code to re-load it in. This is usually discarded by the original owner and no copy of it is kept by Fiat.
The code can be recovered from the key, email me if you want help.
Tony.

just tried receiver green led flashes, and red led on key flashes so am presuming both are ok, have tried to recode following instructions in manual but no luck as yet, has anyone got any ideas on what to do, could i go to a key shop and get the blue key coded using the red key ?? am stuck on this one

cheers

i have the red key and the blue key bothe the key And the recever flash i think i have the code for my key what do i do

Bravotony- Key shops can only help with the immobiliser,
:nono: NOT THE REMOTE :nono:

All codes are 4 digit and octal ie none over seven, typical code is 7. 0. 3. 4.

Press receiver pb and release.
Wait for green marker pulse, then press pb number of times of first digit.
Wait for next marker, and enter all 4 digits in same way.
If you have a zero in code, then do nothing until the next marker pulse.
If code is correct green led will flash.
Whilst it flashes push pb on receiver and hold in, push pb on remote and hold in for 10 secs.
If code is correct receiver green led will stay on for a few secs.
Remote will now work.
Tony

cheers m8 i will give it a go

aftre i have done the code the green light stays on constant 4 about 10 sec i have tried pressing the key at the same time but it has not seemed 2 work

i tryed it an the green light did not flash but it did stay on for bout 10 secs after puting the code in but it hasent worked yet does this mean the code is rong

cheers

yes code is wrong

any chance u no how 2 get a new code or is it just not worth bothering with

reddy4bed said:

the master key / blue key sequence is for the immobiliser only, nothing to do with central locking/alarm.
Test as follows:-
push button on key, if red led flashes, then key is ok.
Push button on receiver, if green led flashes, receiver is ok.
If c/l does not operate when key button is pressed, then key and receiver are out of sync.
You need to re-load in the key to make it work,- you need the unlock code to re-load it in. This is usually discarded by the original owner and no copy of it is kept by fiat.
The code can be recovered from the key, email me if you want help.
Tony.

Click to expand...

my keys both don't light up, i have changed batteries and i get nowt