im Axle Specialists

General need some help

Currently reading:
General need some help

S

stuntman323

New member
Joined
Jan 10, 2009
Messages
37
Points
10
Location
kirkcaldy
is there any chance that my old wolfrace alloys there 4 stud and came of a vectra i was told that they might fit my fit my bravo can anyone help here i dont want to spend another 100 sheets on new tyres if the dont fit thanks guy's (y)
 
Hi

The PCD of your vauxhall is probably 4x100 where as fiat is 4x98, if this is the case you can use wobbly bolts to fit your alloys.

If the centre bore on the alloys is not 58.1mm you will also need spigot rings. You may need spacers if the offset is very different, though spigot rings server as spacers aswell.

Wobbly bolts have a moving collar addapting for the difference in PCD
71c7_1.JPG
 
Adrian Bravo said:
Hi

The PCD of your vauxhall is probably 4x100 where as fiat is 4x98, if this is the case you can use wobbly bolts to fit your alloys.

If the centre bore on the alloys is not 58.1mm you will also need spigot rings. You may need spacers if the offset is very different, though spigot rings server as spacers aswell.

Wobbly bolts have a moving collar addapting for the difference in PCD
71c7_1.JPG
Click to expand...
thanks just one other where can i get the wobbly bolts about and how much will they set me back Adrian Bravo (y)
 
You must log in or register to reply here.

Similar threads

P
General Need some help for my Bravo HGT
Replies
2
Views
2K
CFREITAS
CFREITAS
Matabikso
Technical Help Brava 1.2 16v starts and dies
2
Replies
20
Views
1K
varesecrazy
V
B
Technical Owners manual help
Replies
1
Views
1K
g8rpi
g8rpi
F
Technical Headlight unit change (please help)
Replies
4
Views
1K
Fiatbravo182
F
C
Technical Help engine stals when Corning at low speed ir stand still
Replies
0
Views
1K
carlosalex1974
C
Back
Top