Crashed through a gigantic pothole last night in the snow and slush and just been advised the offside front wheel is now buckled and can't be repaired.

New wheel time. Anybody have either a spare wheel they want to flog me or a good source of standard new ones? I'm not too keen on 4 aftermarket wheels unless I really have to..Much rather Fiat originals but not at Fiat main dealer prices.

Help!

drat wish you ask last week just sold set of wheels on ebay, if buyer dont turn up i will let you know

I have 4 original steel wheels in reasonable condition although they could do with painting. They are from a '97 car and have tyres but as they (the tyres) are old I personally would not use them. Free if you want them except you have to collect from Woking, Surrey.

I've got 3 original alloys - but I'm in Norway...

Thanks guys. It seems our local motor factor can do 4 replacement alloys for less than the price of 1 from Fiat. No surprises there. My concern is they need to look decent, not some crap tat that a teenager would stick on his diesel Bravo....:devil:

If its no go in the store then it may a be a weekend in Norway with the van....

Fiat Original Alloys

Seen this?

afroking said:

Fiat Original Alloys

Seen this?

Click to expand...

You Sir are a steel eyed missile man..

email sent to seller.

Errr.. I now have 7 alloys for the B.

Anybody want some wheels...?

but, you are short for one, you can't drive with 7 alloys. you need 8 of them.
2 front, 2 rear, 2 left and 2 right...

Rustbucket said:

Errr.. I now have 7 alloys for the B.

Anybody want some wheels...?

Click to expand...

Any idea how much shipping to Norway would be for one? I've been one short ever since I planted my B in the bushes

It is only a 28 hour drive - I'm tempted.

Robot said:

Any idea how much shipping to Norway would be for one? I've been one short ever since I planted my B in the bushes

Click to expand...

Have to weigh it. Couriers charge by weight / volume.
I have 3 spare alloys in the same pattern as 'wish mine was orange' siggy pic. All unbent / unbuckled but all 10yr old with fair/wear and tear.

They all have part worn P6000's on them but I'd suggest taking the tyre off to reduce shipping costs.

Rustbucket said:

You Sir are a steel eyed missile man..

email sent to seller.

Click to expand...

Warning - I checked most of the wheels shown and they are 100mm PCD.

I'm fairly certain the Barchetta is standard Fiat 98mm PCD so you will need a full set of 'wobbly' bolts.

Glad to help.

Rustbucket said:

Have to weigh it. Couriers charge by weight / volume.
I have 3 spare alloys in the same pattern as 'wish mine was orange' siggy pic. All unbent / unbuckled but all 10yr old with fair/wear and tear.

They all have part worn P6000's on them but I'd suggest taking the tyre off to reduce shipping costs.

Click to expand...

Wear and tear's no problem;the 3 good ones I have show plenty of wear too. The one in the bottom right corner shows a little too much wear though

What price would you be wanting for the alloy? Shipping without the tyre would be the best Any slow/cheap shipping would be good as I'm in no hurry; the alloy would (/will) be used for the studded tyres.

Robot said:

What price would you be wanting for the alloy? Shipping without the tyre would be the best Any slow/cheap shipping would be good as I'm in no hurry; the alloy would (/will) be used for the studded tyres.

Click to expand...

You can have it at cost. €50? I don't have scales for weighing the wheel..my pocket scales for weed dealing don't go that far... I'd guess around 10kg for wheel without tyre?

Suggest you organise courier from your end and pm me the details and I'll pack one up.