General Aux installation

Currently reading:
General Aux installation

Cg123

New member
Joined
Aug 1, 2017
Messages
20
Points
4
Hi, I have a 2013 500 pop but don't have blue&me so I don't have an aux which is pretty annoying when I have to listen to the radio all the time. Anyway just wondering if there's any way I can install an aux port or not. I am not mechanical so would have to get someone to do it for me
 
I've ordered a cheapo Aux cable which may or may not work. It's only £3.59 so I thought I would have a punt. Have a look at the recent thread on this.

Basically you take out your head unit, and plug the aux lead into it, run the cable where ever you want it and it will plug in via the headphone jack. It seems to work with some head units but not all.
 
I've ordered a cheapo Aux cable which may or may not work. It's only £3.59 so I thought I would have a punt. Have a look at the recent thread on this.

Basically you take out your head unit, and plug the aux lead into it, run the cable where ever you want it and it will plug in via the headphone jack. It seems to work with some head units but not all.



How do I know if it has an aux in the back?
 
With no cd in the player, press "Cd" twice if aux comes up the second press you're good if no "aux" comes up it won't work, I do wonder what the switched pin does, the aux in is used when a cd changer is fitted so may need some type of signal to tell the radio to activate the aux input?
 
With no cd in the player, press "Cd" twice if aux comes up the second press you're good if no "aux" comes up it won't work, I do wonder what the switched pin does, the aux in is used when a cd changer is fitted so may need some type of signal to tell the radio to activate the aux input?



Tried and didn't do it:(
 
Back
Top