dont post much as I am normally driving my 500

Just thought I would let everyone know what little things have been fixed on the 500,
1st was the cabin fan, it made a funny ticking noise so it had to have a whole new motor!

2nd the washerjet has gone missing, not the bit that sticks up but the internal spray!

I did pressure wash it but never went close. Its being fixed soon by fiat.
I will ask them about the 1.2 software update whilst I am in there and see what they say.
apart from that I have 5000 miles happy motoring:slayer:

the most annoying niggley thing for me is how bright the full beam indicator is ! it lights up the whole of the interior

Yeah! it certainly doesn't need an LED bulb upgrade.

Exactly the same on the Panda... hence why the 500 has it, its so bright I hardly use main beam. I cant believe that Fiat still make the light so bright, the Pandas been going since 2003 so surely someone must have complained

caz360 said:

1st was the cabin fan, it made a funny ticking noise so it had to have a whole new motor!

Click to expand...

It seems I have the same "funny" noise
How long does it take to replace the fan motor?

i have a little bit of a problem with my ignition switch.Most of the times it doesn't turn to AVV.It turns to MAR but it refuses to go further.I just have to turn the key back to stop and try again in order to fire up the car. Any thoughts?

iraklas said:

i have a little bit of a problem with my ignition switch.Most of the times it doesn't turn to AVV.It turns to MAR but it refuses to go further.I just have to turn the key back to stop and try again in order to fire up the car. Any thoughts?

Click to expand...

It sounds like you're pushing it ever so slightly past MAR, which means the car thinks you've tried to start it and failed, so will lock up for you to try again. Only turn it very gently towards MAR and it should click into place, then from there you can start the car.

it took them about 2 hours to do the motor so i drank lots of coffie!!

Lloyd71 said:

It sounds like you're pushing it ever so slightly past MAR, which means the car thinks you've tried to start it and failed, so will lock up for you to try again. Only turn it very gently towards MAR and it should click into place, then from there you can start the car.

Click to expand...

:yeahthat: